An overview on dispersion procedures and testing methods for the ecotoxicity testing of nanomaterials in the marine environment.

Considerable efforts have been devoted to develop or adapt existing guidelines and protocols, to obtain robust and reproducible results from (eco)toxicological assays on engineered nanomaterials (NMs). However, while many studies investigated adverse effects of NMs on freshwater species, less attention was posed to the marine environment, a major sink for these contaminants. This review discusses the procedures used to assess the ecotoxicity of NMs in the marine environment, focusing on the use of protocols and methods for preparing NMs dispersions and on the NMs physicochemical characterization in exposure media. To this purpose, a critical analysis of the literature since 2010 was carried out, based on the publication of the first NMs dispersion protocols. Among the 89 selected studies, only <5 % followed a standardized dispersion protocol combined with NMs characterization in ecotoxicological media, while more than half used a non-standardized dispersion method but performed NMs characterization. In the remaining studies, only partial or no information on dispersion procedures or on physicochemical characterization was provided. This literature review also highlighted that metal oxides NMs were the most studied (42 %), but with an increasing interest in last years towards nanoplastics (14 %) and multicomponent nanomaterials (MCNMs, 7 %), in line with the growing attention on these emerging contaminants. For all these NMs, primary producers as algae and bacteria were the most studied groups of marine species, in addition to mollusca, while organisms at higher trophic levels were less represented, likely due to challenges in evaluating adverse effects on more complex organisms. Thus, despite the wide use of NMs in different applications, standard dispersion protocols are not often used for ecotoxicity testing with marine species. However, the efforts to characterize NMs in ecotoxicological media recognize the importance of following conditions that are as standardized as possible to support the ecological hazard assessment of NMs.

Cytotoxicity inhibition of catechol's type molecules by grafting on TiO2 and Fe2O3 nanoparticles surface.

The potential toxicity deriving from the interaction between chemicals and manufactured nanoparticles (NPs) represents an emerging threat to the environment and human health. Several studies have focused on the risks and (eco)toxicity of manufactured NPs as a consequence of their extensive use in recent years, however, there is still a limited understanding of the combined effects caused by manufactured NPs in the presence of other environmental contaminants. This is particularly relevant to aquatic environments, where many types of pollutants are inevitably released and can be involved in many kinds of reactions. In this context, the interaction between catecholate type ligands and two different nanomaterials, namely TiO2 and Fe2O3 NPs, was investigated by performing cytotoxicity assays with the topminnow fish hepatoma cell line (PLHC-1) using: i) the original organic molecules, ii) pristine NPs alone, and iii) modified NPs obtained by grafting the ligands on the NPs surface. Cytotoxic effects were explored at three different levels, specifically on cellular metabolism, membrane integrity and lysosomal activity. The outcomes from these assays showed cytotoxicity only for the free catechol type ligands, while in general no significant decrease in cell viability was observed for pristine NPs, as well as for the modified NPs, regardless the initial cytotoxicity level of the organic ligands These results suggest that the binding of catechols on the NPs' surface inhibited their cytotoxicity, indicating that TiO2 and Fe2O3 NPs may act as sorbents of these contaminants, thus reducing their possible detrimental effects.

Colloidal stability classification of TiO2 nanoparticles in artificial and in natural waters by cluster analysis and a global stability index: Influence of standard and natural colloidal particles.

In the field of exposure-driven risk assessment of engineered nanoparticles (NPs), the highly complex interactions of NPs with natural components in surface waters are considered key factors to understand their fate and behavior in the environment. However, since experimental approaches aiming at imitating environmentally relevant conditions include many parameters and lead to a high number of outcomes, statistical tools can be extremely useful to support the results' interpretation. In this context, a multimethod approach was applied to investigate the colloidal behavior of TiO2 NPs in both artificial waters and natural brackish water (from the Venice lagoon, Italy), in the presence of standard kaolinite and natural organic matter (NOM), or of the fine fraction of natural colloidal particles (NCPs) from the lagoon sediment. In detail, the experimental data obtained, i.e. hydrodynamic size, surface charge and sedimentation velocity values, were i) statistically treated by hierarchical clustering and ii) merged into a global stability index (IG). The hierarchical clustering allowed to group the dispersions into three colloidal stability classes, where the main discriminant was the medium composition (i.e. ionic strength and presence of NOM), while the IG allowed to establish a colloidal stability ranking of the dispersions within each class. Moreover, the comparison among the different dispersions suggested that kaolinite could be considered as a suitable surrogate for NCPs, to estimate the colloidal behavior and environmental fate of TiO2 NPs in natural aqueous media.

Novel multimethod approach for the determination of the colloidal stability of nanomaterials in complex environmental mixtures using a global stability index: TiO2 as case study.

A systematic study on the colloidal behavior of uncoated and polyvinylpyrrolidone (PVP) coated TiO2 engineered nanomaterials (ENMs) in simulated aqueous media is herein reported, in which conditions representative for natural waters (pH, presence of divalent electrolytes (i.e. Ca2+/Mg2+ and SO42-), of natural organic matter (NOM) and of suspended particulate matter (SPM)) were systematically varied. The colloidal stability of the different dispersions was investigated by means of Dynamic and Electrophoretic Light Scattering (DLS and ELS) and Centrifugal Separation Analysis (CSA), and a global stability index based on these three techniques was developed. The index allows to quantitatively classify the nano-based dispersions according to their colloidal stability affected by the different parameters studied. This multimethod approach clearly identifies inorganic SPM followed by divalent electrolytes as the main natural components destabilizing TiO2 ENMs upon entering in simulated natural waters, while it highlights a moderate stabilization induced by NOM, depending mainly on pH. Moreover, the PVP coating was found to attenuate the influence of these parameters on the colloidal stability. The obtained results show how the global stability index developed is influenced by the complexity of the system, suggesting the importance of combining the information gathered from all the techniques employed to better elucidate the fate and behavior of ENMs in natural surface waters.

Pulmonary toxicity and gene expression changes after short-term inhalation exposure to surface-modified copper oxide nanoparticles.

Copper oxide nanoparticles (CuO NPs) have previously been shown to cause dose-dependent pulmonary toxicity following inhalation. Here, CuO NPs (10 nm), coated with polyethylenimine (PEI) or ascorbate (ASC) resulting in positively or negatively charged NPs, respectively, were evaluated. Rats were exposed nose-only to similar exposure dose levels of ASC or PEI coated CuO NPs for 5 consecutive days. On day 6 and day 27 post-exposure, pulmonary toxicity markers in bronchoalveolar lavage fluid (BALF), lung histopathology and genome-wide transcriptomic changes in lungs, were assessed. BALF analyses showed a dose-dependent pulmonary inflammation and cell damage, which was supported by the lung histopathological findings of hypertrophy/hyperplasia of bronchiolar and alveolar epithelium, interstitial and alveolar inflammation, and paracortical histiocytosis in mediastinal lymph nodes for both types of CuO NPs. Transcriptomics analysis showed that pathways related to inflammation and cell proliferation were significantly activated. Additionally, we found evidence for the dysregulation of drug metabolism-related genes, especially in rats exposed to ASC-coated CuO NPs. Overall, no differences in the type of toxic effects and potency between the two surface coatings could be established, except with respect to the (regional) dose that initiates bronchiolar and alveolar hypertrophy. This disproves our hypothesis that differences in surface coatings affect the pulmonary toxicity of CuO NPs.

Organic Polyradicals as Redox Mediators: Effect of Intramolecular Radical Interactions on Their Efficiency.

The spin-spin interactions between unpaired electrons in organic (poly)radicals, especially nitroxides, are largely investigated and are of crucial importance for their applications in areas such as organic magnetism, molecular charge transfer, or multiple spin labeling in structural biology. Recently, 2,2,6,6-tetramethylpiperidinyloxyl and polymers functionalized with nitroxides have been described as successful redox mediators in several electrochemical applications; however, the study of spin-spin interaction effect in such an area is absent. This communication reports the preparation of a novel family of discrete polynitroxide molecules, with the same number of radical units but different arrangements to study the effect of intramolecular spin-spin interactions on their electrochemical potential and their use as oxidation redox mediators in a Li-oxygen battery. We find that the intensity of interactions, as measured by the d1/d electron paramagnetic resonance parameter, progressively lowers the reduction potential. This allows us to tune the charging potential of the battery, optimizing its energy efficiency.

Tris-pyridylmethylamine (TPMA) complexes functionalized with persistent nitronyl nitroxide organic radicals.

The chance to have persistent organic radicals in combination with metals has attracted much interest since it offers the possibility of having new functional molecules with multiple open-shell elements. In this study, we report the synthesis of two tripodal tris(2-pyridyl)methylamine ligands (TPMA) functionalized with nitronyl nitroxide persistent radicals. The newly formed ligands have been used to coordinate zinc(ii), copper(ii), iron(ii) and cobalt(ii). The resulting complexes have been investigated by means of electron paramagnetic resonance (EPR), ESI-MS, FT-IR spectroscopy and X-ray diffraction. An electron reduction of the N-O radical moiety has been observed, depending on the metal used for the formation of the complex and the reaction conditions. We have observed small differences in the EPR spectra depending on the meta or para position of the radical moiety in the complex structure and some antiferromagnetic interactions between the paramagnetic M(ii) ions and the radical species.

Consecutive thermal and wet conditioning treatments of sedimentary stabilized cementitious materials from HPSS® technology: Effects on leaching and microstructure.

Soil and sediment contamination is recognised as one of the most relevant environmental problems caused by past industrial activities and unsustainable waste disposal practices, highlighting the need to develop or improve effective remediation techniques to support sustainable management strategies. In this context, the remediation of sediments dredged from the Mincio river (Italy) contaminated by mercury and heavy hydrocarbons (C12-40) was carried out by applying and implementing the High Performance Solidification/Stabilization technology, aimed at producing safe and reusable cement-based granular materials. The technology was improved by decreasing both the temperature and time of the thermal desorption treatment (from 280 to 110 °C and from 4-16 h to 70 min, respectively) and by including a wet conditioning step to the process. Temperature and time reduction allowed to diminish the degradation of the cementitious phases of the granules (usually related to the high temperatures employed in the process), while the wet conditioning step allowed to improve their mechanical properties, as well as to further reduce the leaching of contaminants. The physical-chemical properties of the granules and contaminant leaching in water were investigated by Inductively Coupled Plasma Mass and Optical Emission Spectrometry, Ultraviolet-Visible spectroscopy, Gas Chromatography, X-Ray Powder Diffraction, and Scanning Electron Microscopy, in order to identify the optimal parameters for both thermal and wet conditioning processes. The overall results showed that the use of consecutive thermal and wet conditioning treatment on sedimentary cementitious materials from the High Performance Solidification/Stabilization technology led to the removal of volatile pollutants and to the improvement of granule quality, thus providing a final material that satisfied all the Italian regulatory requirements for reuse. Therefore, the findings obtained in this study may contribute to the development of sustainable management strategies for contaminated soils and sediments, leading to their valorisation through the transformation into reusable materials.

Guiding the development of sustainable nano-enabled products for the conservation of works of art: proposal for a framework implementing the Safe by Design concept.

Nanotechnology provides innovative and promising solutions for the conservation of cultural heritage, but the development and application of new nano-enabled products pose concerns regarding their human health and environmental risks. To address these issues, we propose a sustainability framework implementing the Safe by Design concept to support product developers in the early steps of product development, with the aim to provide safer nano-formulations for conservation, while retaining their functionality. In addition, this framework can support the assessment of sustainability of new products and their comparison to their conventional chemical counterparts if any. The goal is to promote the selection and use of safer and more sustainable nano-based products in different conservation contexts. The application of the proposed framework is illustrated through a hypothetical case which provides a realistic example of the methodological steps to be followed, tailored and iterated along the decision-making process.

Interaction between Copper Oxide Nanoparticles and Amino Acids: Influence on the Antibacterial Activity.

The increasing concern about antibiotic-resistance has led to the search for alternative antimicrobial agents. In this effort, different metal oxide nanomaterials are currently under investigation, in order to assess their effectiveness, safety and mode of action. This study focused on CuO nanoparticles (CuO NPs) and was aimed at evaluating how the properties and the antimicrobial activity of these nanomaterials may be affected by the interaction with ligands present in biological and environmental media. Ligands can attach to the surface of particles and/or contribute to their dissolution through ligand-assisted ion release and the formation of complexes with copper ions. Eight natural amino acids (L-Arg, L-Asp, L-Glu, L-Cys, L-Val, L-Leu, L-Phe, L-Tyr) were chosen as model molecules to investigate these interactions and the toxicity of the obtained materials against the Gram-positive bacterium Staphylococcus epidermidis ATCC 35984. A different behavior from pristine CuO NPs was observed, depending on the aminoacidic side chain. These results were supported by physico-chemical and colloidal characterization carried out by means of Fourier-Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Thermo-Gravimetric Analysis (TGA), Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and light scattering techniques (Dynamic Light Scattering (DLS), Electrophoretic Light Scattering (ELS) and Centrifugal Separation Analysis (CSA).

Extending substrate sensing capabilities of zinc tris(2-pyridylmethyl)amine-based stereodynamic probe.

Tripodal metal complexes have been widely used for catalysis and more recently also for molecular recognition applications. Their ability in recognition and signal amplification of chiral substrates is because of the setup of the ligand around the metal in a propeller shape. Within this subject, we have recently reported tris(2-pyridylmethyl)amine- and triphenolamine-based complexes for the determination of the enantiomeric excess of various substrates. Herein, we show the versatility of the zinc tris(2-pyridylmethyl)amine-based stereodynamic probe by performing a detailed study of the imine formation process, by the extension of the sensing capabilities to other chiral compounds. A principal component analysis study of the system together with TD-DFT studies highlights the molecular origin of the observed chiroptical properties.

Toxicity of copper oxide and basic copper carbonate nanoparticles after short-term oral exposure in rats.

Copper oxide (CuO) nanoparticles (NPs) and copper carbonate nanoparticles (Cu2CO3(OH)2 NPs have applications as antimicrobial agents and wood preservatives: an application that may lead to oral ingestion via hand to mouth transfer. Rats were exposed by oral gavage to CuO NPs and Cu2CO3(OH)2 NPs for five consecutive days with doses from 1 to 512 mg/kg and 4 to 128 mg/kg per day, respectively, and toxicity was evaluated at days 6 and 26. Both CuO NPs and Cu2CO3(OH)2 NPs induced changes in hematology parameters, as well as clinical chemistry markers (e.g. increased alanine aminotransferase, ALT) indicative of liver damage For CuO NPs histopathological alterations were observed in bone marrow, stomach and liver mainly consisting of an inflammatory response, ulceration, and degeneration. Cu2CO3(OH)2 NPs induced morphological alterations in the stomach, liver, intestines, spleen, thymus, kidneys, and bone marrow. In spleen and thymus lymphoid, depletion was noted that warrants further immunotoxicological evaluation. The NPs showed partial dissolution in artificial simulated stomach fluids, while in intestinal conditions, the primary particles simultaneously shrank and agglomerated into large structures. This means that both copper ions and the particulate nanoforms should be considered as potential causal agents for the observed toxicity. For risk assessment, the lowest bench mark dose (BMD) was similar for both NPs for the serum liver enzyme AST (an indication of liver toxicity), being 26.2 mg/kg for CuO NPs and 30.8 mg/kg for Cu2CO3(OH)2 NPs. This was surprising since the histopathology evidence demonstrates more severe organ damage for Cu2CO3(OH)2 NPs than for CuO NPs.

Environmental Impacts by Fragments Released from Nanoenabled Products: A Multiassay, Multimaterial Exploration by the SUN Approach.

Nanoenabled products (NEPs) have numerous outdoor uses in construction, transportation or consumer scenarios, and there is evidence that their fragments are released in the environment at low rates. We hypothesized that the lower surface availability of NEPs fragment reduced their environmental effects with respect to pristine nanomaterials. This hypothesis was explored by testing fragments generated by intentional micronisation ("the SUN approach"; Nowack et al. Meeting the Needs for Released Nanomaterials Required for Further Testing: The SUN Approach. Environmental Science & Technology, 2016 (50), 2747). The NEPs were composed of four matrices (epoxy, polyolefin, polyoxymethylene, and cement) with up to 5% content of three nanomaterials (carbon nanotubes, iron oxide, and organic pigment). Regardless of the type of nanomaterial or matrix used, it was observed that nanomaterials were only partially exposed at the NEP fragment surface, indicating that mostly the intrinsic and extrinsic properties of the matrix drove the NEP fragment toxicity. Ecotoxicity in multiple assays was done covering relevant media from terrestrial to aquatic, including sewage treatment plant (biological activity), soil worms (Enchytraeus crypticus), and fish (zebrafish embryo and larvae and trout cell lines). We designed the studies to explore the possible modulation of ecotoxicity by nanomaterial additives in plastics/polymer/cement, finding none. The results support NEPs grouping by the matrix material regarding ecotoxicological effect during the use phase. Furthermore, control results on nanomaterial-free polymer fragments representing microplastic had no significant adverse effects up to the highest concentration tested.

Diasteroselective multi-component assemblies from dynamic covalent imine condensation and metal-coordination chemistry: mechanism and narcissistic stereochemistry self-sorting.

Self-assembly of a modified tris(2-pyridylmethyl)amine TPMA ligand, zinc(ii) or cobalt(ii) ions, and amino acids have been used effectively as stereo dynamic optical probes for the determination of the enantiomeric excess of free amino acids either using Electronic or Vibrational Circular Dichroism (CD and VCD). Herein, we report the mechanistic and stereochemical study of the self-assembly process which reveals a complex equilibrium in solution where even small variations in the experimental conditions can profoundly affect the final products of the reaction. In particular, variation on the metal stoichiometry switch give rises to an entirely enantio narcissistic self-assembly of the structure.

A stereodynamic fluorescent probe for amino acids. Circular dichroism and circularly polarized luminescence analysis.

The use of stereodynamic probes is becoming one of the leading strategies for the fast and effective determination of enantiomeric excess. Recently, we reported a series of novel molecular architectures based on a modified tris(2-pyridylmethyl)amine complex (TPMA), which are able to amplify the electronic CD, in the case of Zn(II) assemblies and vibrational CD, in the case of Co(II) assemblies. Herein, we report a structural modification of the ligand with the purpose to obtain a fluorescent chiral probe. The study deals with the synthesis of the novel ligand, the formation of the self-assembly system with amino acids, and the study of the electronic CD and circularly polarized luminescence.

Binding Profiles of Self-Assembled Supramolecular Cages from ESI-MS Based Methodology.

Confined molecular environments have peculiar characteristics that make their properties unique in the field of biological and chemical sciences. In recent years, advances in supramolecular capsule and cage synthesis have presented the possibility to interpret the principles behind their self-assembly and functions, which has led to new molecular systems that display outstanding properties in molecular recognition and catalysis. Herein, we report a rapid method based on ESI-MS to determine the binding profiles for linear saturated dicarboxylic acids in a series of different cages. The cages were obtained by self-assembly of modified tris(pyridylmethyl)amine (TPMA) complexes and diamines chosen to explore variations in their size and flexibility. This methodology has provided information on how small changes in the structures of the host and guest can contribute to recognition events. Moreover, it was possible to study molecular systems that contain paramagnetic metals, which are not suitable for classical binding-constant determination by 1 H NMR spectroscopy.

Cobalt, nickel, and iron complexes of 8-hydroxyquinoline-di(2-picolyl)amine for light-driven hydrogen evolution.

Novel cobalt, nickel, and iron complexes based on the pentadentate 8-hydroxyquinoline-di(2-picolyl)amine ligand were synthesized and thoroughly characterized. X-ray structures of both the cobalt and iron complexes were also obtained, showing the tendency to adopt a pseudo-octahedral geometry by coordination of an additional sixth ligand. These metal complexes were then studied as potential hydrogen-evolving catalysts (HECs) under both electrochemical and light-driven conditions. In particular, two different photochemical systems were tested involving either Ru(bpy)32+/ascorbic acid or Ir(ppy)2(bpy)+/TEA sensitizer/sacrificial donor couples. The electrochemical results showed that these metal complexes may behave as competent HECs. However, under photochemical conditions, only the cobalt compound displayed substantial hydrogen-evolving activity in both ruthenium- and iridium-based systems. The nickel and iron complexes, on the other hand, exhibited appreciable photocatalytic activity only in the iridium-based photochemical system, while showing negligible hydrogen evolution ability when employed in the ruthenium-based one.

Triggering Assembly and Disassembly of a Supramolecular Cage.

A novel supramolecular cage built from the self-assembly of tris(2-pyridylmethyl)amine zinc complexes through imine condensation chemistry is reported. The cage recognition properties over a variety of structurally related guests, together with the kinetic study of the template assembly and disassembly, have been investigated in detail. This knowledge has been used to selectively modulate the rate of both assembly and disassembly processes. In particular, a novel disassembly method induced by strain release of the guest has been developed.

Photoinduced hydrogen evolution with new tetradentate cobalt(ii) complexes based on the TPMA ligand.

Hydrogen production from water splitting is nowadays recognized as a target, fundamental reaction for the production of clean fuels. Indeed, tremendous efforts have been devoted towards the research of suitable catalysts capable of performing this reaction. With respect to heterogeneous systems, molecular catalysts such as metal complexes are amenable to chemical functionalization in order to fine tune the catalytic properties. In this paper a new class of tris(2-pyridylmethyl)-amine (TPMA) cobalt(ii) complexes (CoL0-4) has been synthesized and employed as hydrogen evolving catalysts under photochemical conditions taking advantage of Ru(bpy)3(2+) (where bpy is 2,2'-bipyridine) as a light-harvesting sensitizer and ascorbic acid as a sacrificial electron donor. Tuning of the photocatalytic activity has been attempted through the introduction of different substituents at the catalyst periphery rather than through a direct chemical modification of the chelating TPMA ligand. The results show that CoL0-4 behave as competent hydrogen evolving catalysts (HECs), although the effects played by the different substituents on the catalysis are relatively modest. Possible reasons supporting the observed behavior as well as possible improvements of the aforementioned tuning approach are discussed.

Effective bromo and chloro peroxidation catalysed by tungsten(vi) amino triphenolate complexes.

Amino triphenolate tungsten(vi) complexes have been prepared and they proved to be efficient catalysts in haloperoxidation reactions using hydrogen peroxide as a terminal oxidant and inorganic sources of halides. In particular, interesting results have been obtained in the challenging chloroperoxidation reactivity (catalyst loading down to 0.05% with TONs up to 900). A comparison among three different metal complexes bearing the same ligand (vanadium(v), molybdenum(vi) and tungsten(vi)) showed much better performances of the last complex both on bromo and chloro peroxidations.